The Teeter Pouch is a lightweight, collapsible bottle pouch that attaches directly to any PALS grid with 4+ rows and 2+ columns. Made from proprietary FirstSpear® 6/12™ fabric, the Teeter Pouch is adjustable for both height and depth, allowing it to do everything from secure a bottle to function as a beavertail, all while remaining lighter than comparable pouches.

Specifications

• Weight: 1.47 ounces (41.6 grams)
• Materials: FirstSpear® 6/12™ fabric (500D face)
• Features: lightweight, collapsible EDC pouch for attachment to PALS grids
• Color: coyote brown, Multicam, foliage green, black
• Made in the US from US materials

FirstSpear® and 6/12™ are trademarks of FirstSpear, LLC.

The Teeter Pouch is a lightweight, collapsible bottle pouch that attaches directly to any PALS grid with 4+ rows and 2+ columns. Made from proprietary FirstSpear® 6/12™ fabric, the Teeter Pouch is adjustable for both height and depth, allowing it to do everything from secure a bottle to function as a beavertail, all while remaining lighter than comparable pouches.

Specifications

• Weight: 1.47 ounces (41.6 grams)
• Materials: FirstSpear® 6/12™ fabric (500D face)
• Features: lightweight, collapsible EDC pouch for attachment to PALS grids
• Color: coyote brown, Multicam, foliage green, black
• Made in the US from US materials

FirstSpear® and 6/12™ are trademarks of FirstSpear, LLC.

The pre-order period has ended. Thank you to all who helped make it successful! The estimated ship date for pre-orders is August 2017.

The Cache is a lightweight, PALS-compatible beavertail accessory that's designed to fit a wide variety of EDC and tactical packs. It lies flat when not in use and expands to secure bulky or awkward loads thanks to a flexible fiberglass stay structure. The Cache attaches to any compatible pack via four 3/4" PALS attachment straps at the bottom and two adjustment straps with snap-on buckles at top. Fits standard PALS grids (1.5" spacing) and Mystery Ranch layouts (2"/3"), and can be adapted to fit a multitude of other packs.

Check out the prototype review presented by Loaded Pocketz.

Specifications

• Weight: 4.76 ounces (135 grams)
• Dimensions: 13.5" x 10"/~7" (flat)
• Materials: 500D Cordura, T-70 nylon thread
• Features: lies flat when not in use and expands around cargo
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US materials

Compatibility List

This is a non-exclusive list of packs that the Cache will fit securely. It should fit any pack with at least 6 standard PALS columns on the face or bottom (near the face) and the appropriate upper anchor points.

ATS

• RAID Pack II

AWS Inc.

• #50638 – 3 Day Recon Pack

• #54964 – 5 Day Assault Pack

• #50653 – Jumpable Backpack

• #50639 – MOLLE Day Pack

BDS Tactical

• Basic Combat Trauma Medical Bag

BLACKHAWK!

• Lightweight Phoenix™ Pack

• Ultralight 3-Day Assault™ Pack

• Velocity X1 Jump Pack

• Velocity X3 Jump Pack

• YOMP™ Pack

Camelbak

• Motherlode™ (MOLLE webbing style)

• TriZip™

Chinook Medical Gear

• Medic Pack

• Medical Operator Pack

Eagle Industries

• A-III Assault Pack MOLLE Style

• A-III Medical Pack MOLLE Style

• Becker Patrol Pack MOLLE Style

• Crossover Pack

First Tactical

• Tactix 1-Day Plus Backpack

High Ground Gear

• Medical Trauma Pack

Kifaru

• X-Ray

Maxpedition

• Vulture-II™ 3-Day Backpack

Mystery Ranch

• ASAP

• Komodo Dragon

• Overload

• ROUS

• Skiritai

• Streetfighter (old model with upper attachment loops)

• Urban Assault (old model with upper attachment loops)

• 1 Day Assault (1DAP)

• 3 Day Assault (3DAP)

Propper

• U.C. Pack

Spec.-Ops. Brand

• T.H.E. Pack (Tactical and UAP)

Tactical Tailor

• M5 Medic Pack

Triple Aught Design

• FAST Pack EDC

• FAST Pack Litespeed

TSSi

• TACOPS® M-10 Medical Backpack

• TACOPS® Talaria

TYR Tactical

• Huron™ Light Weight Assault Pack - 3-Day

USGI

• Corpsman Assault System Medical Assault Pack

• USMC Pack (FILBE) Assault Pack

5.11

• RUSH12™/RUSH24™

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.

The pre-order period has ended. Thank you to all who helped make it successful! The estimated ship date for pre-orders is August 2017.

The Cache is a lightweight, PALS-compatible beavertail accessory that's designed to fit a wide variety of EDC and tactical packs. It lies flat when not in use and expands to secure bulky or awkward loads thanks to a flexible fiberglass stay structure. The Cache attaches to any compatible pack via four 3/4" PALS attachment straps at the bottom and two adjustment straps with snap-on buckles at top. Fits standard PALS grids (1.5" spacing) and Mystery Ranch layouts (2"/3"), and can be adapted to fit a multitude of other packs.

Check out the prototype review presented by Loaded Pocketz.

Specifications

• Weight: 4.76 ounces (135 grams)
• Dimensions: 13.5" x 10"/~7" (flat)
• Materials: 500D Cordura, T-70 nylon thread
• Features: lies flat when not in use and expands around cargo
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US materials

Compatibility List

This is a non-exclusive list of packs that the Cache will fit securely. It should fit any pack with at least 6 standard PALS columns on the face or bottom (near the face) and the appropriate upper anchor points.

ATS

• RAID Pack II

AWS Inc.

• #50638 – 3 Day Recon Pack

• #54964 – 5 Day Assault Pack

• #50653 – Jumpable Backpack

• #50639 – MOLLE Day Pack

BDS Tactical

• Basic Combat Trauma Medical Bag

BLACKHAWK!

• Lightweight Phoenix™ Pack

• Ultralight 3-Day Assault™ Pack

• Velocity X1 Jump Pack

• Velocity X3 Jump Pack

• YOMP™ Pack

Camelbak

• Motherlode™ (MOLLE webbing style)

• TriZip™

Chinook Medical Gear

• Medic Pack

• Medical Operator Pack

Eagle Industries

• A-III Assault Pack MOLLE Style

• A-III Medical Pack MOLLE Style

• Becker Patrol Pack MOLLE Style

• Crossover Pack

First Tactical

• Tactix 1-Day Plus Backpack

High Ground Gear

• Medical Trauma Pack

Kifaru

• X-Ray

Maxpedition

• Vulture-II™ 3-Day Backpack

Mystery Ranch

• ASAP

• Komodo Dragon

• Overload

• ROUS

• Skiritai

• Streetfighter (old model with upper attachment loops)

• Urban Assault (old model with upper attachment loops)

• 1 Day Assault (1DAP)

• 3 Day Assault (3DAP)

Propper

• U.C. Pack

Spec.-Ops. Brand

• T.H.E. Pack (Tactical and UAP)

Tactical Tailor

• M5 Medic Pack

Triple Aught Design

• FAST Pack EDC

• FAST Pack Litespeed

TSSi

• TACOPS® M-10 Medical Backpack

• TACOPS® Talaria

TYR Tactical

• Huron™ Light Weight Assault Pack - 3-Day

USGI

• Corpsman Assault System Medical Assault Pack

• USMC Pack (FILBE) Assault Pack

5.11

• RUSH12™/RUSH24™

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.

*Please note that your payment method will be charged upon ordering.

Everything you need, nothing you don't—that was Matthew Cole's philosophy when he designed the Practical Admin Pouch (PAP) while serving in Iraq in 2009. Head Instructor at Cole Partnerships and Training in Las Vegas, Matt created the PAP to be an intuitive, low-profile pouch to hold mission-essential administrative items. After years of refinement, it's finally available exclusively from Oneiros Valley Innovations.

Intended to be worn front-mounted and centered to prevent interference with a shouldered rifle, the PAP incorporates a fold-out design that does not interfere with magazine access when mounted on a plate carrier, even when heavily laden with contents. Additional features include:

• 500 denier Cordura nylon body.
• Full loop Velcro face, perfect for mounting name tags, IR flags or morale patches.
• 4 elastic loops: 2 sized for pens/markers and 2 for chemlights.
• A separate 2" elastic loop to secure a tourniquet.
• Ambidextrous access and offset elastic loops that allow markers to be removed and reinserted from the side without opening the pouch.
• Two inner pockets and a single outer pocket which can house anything from a small notepad right up to a full-size multitool.
• 3 row and 3 or 4 column PALS profile.
• Fold-out, removable map insert that is dry erase compatible and can be removed quickly for ease of use or to protect sensitive information.

Check out the review by Military Morons and video overview presented by Mil-Spec Monkey.

Specifications

• Weight: 3.42 ounces (97 grams)
• Weight (map insert): 1.52 ounces (43 grams)
• Dimensions: 6" x 4.25" folded, 6" x 12.75" unfolded
• Dimensions (map insert): 5.875" x 7.5"
• Features: removable map insert, integrated tourniquet compatibility, meets military NIR reflectance requirements
• Includes two HSG Clips
• Made in the US from US materials

*Please note that your payment method will be charged upon ordering.

Everything you need, nothing you don't—that was Matthew Cole's philosophy when he designed the Practical Admin Pouch (PAP) while serving in Iraq in 2009. Head Instructor at Cole Partnerships and Training in Las Vegas, Matt created the PAP to be an intuitive, low-profile pouch to hold mission-essential administrative items. After years of refinement, it's finally available exclusively from Oneiros Valley Innovations.

Intended to be worn front-mounted and centered to prevent interference with a shouldered rifle, the PAP incorporates a fold-out design that does not interfere with magazine access when mounted on a plate carrier, even when heavily laden with contents. Additional features include:

• 500 denier Cordura nylon body.
• Full loop Velcro face, perfect for mounting name tags, IR flags or morale patches.
• 4 elastic loops: 2 sized for pens/markers and 2 for chemlights.
• A separate 2" elastic loop to secure a tourniquet.
• Ambidextrous access and offset elastic loops that allow markers to be removed and reinserted from the side without opening the pouch.
• Two inner pockets and a single outer pocket which can house anything from a small notepad right up to a full-size multitool.
• 3 row and 3 or 4 column PALS profile.
• Fold-out, removable map insert that is dry erase compatible and can be removed quickly for ease of use or to protect sensitive information.

Check out the review by Military Morons and video overview presented by Mil-Spec Monkey.

Specifications

• Weight: 3.42 ounces (97 grams)
• Weight (map insert): 1.52 ounces (43 grams)
• Dimensions: 6" x 4.25" folded, 6" x 12.75" unfolded
• Dimensions (map insert): 5.875" x 7.5"
• Features: removable map insert, integrated tourniquet compatibility, meets military NIR reflectance requirements
• Includes two HSG Clips
• Made in the US from US materials

*Please note that your payment method will be charged upon ordering.

The OVI / HPG Under Pack (UP) Belt is a collaborative project between Hill People Gear and OV Innovations. The UP Belt is a slick, buckle-less trouser belt designed to disappear under a pack hipbelt by eliminating buckles and rigid webbing. Made from double-layered 1.5" webbing, the UP Belt features a webbing guide loop and adjustable Velcro closure that minimize bulk. The travel friendly design is an ideal choice when a stiff rigger's belt isn't required.

Specifications

• Weight: 3.03 ounces (86 grams) for size 32"-40"
• Materials: mil-spec nylon webbing and hook and loop, T-70 nylon thread
• Features: double-layered 1.5" webbing, unique adjustable closure mechanism
• Colors: coyote brown, black
• Made in the US from US materials

*Please note that your payment method will be charged upon ordering.

The OVI / HPG Under Pack (UP) Belt is a collaborative project between Hill People Gear and OV Innovations. The UP Belt is a slick, buckle-less trouser belt designed to disappear under a pack hipbelt by eliminating buckles and rigid webbing. Made from double-layered 1.5" webbing, the UP Belt features a webbing guide loop and adjustable Velcro closure that minimize bulk. The travel friendly design is an ideal choice when a stiff rigger's belt isn't required.

Specifications

• Weight: 3.03 ounces (86 grams) for size 32"-40"
• Materials: mil-spec nylon webbing and hook and loop, T-70 nylon thread
• Features: double-layered 1.5" webbing, unique adjustable closure mechanism
• Colors: coyote brown, black
• Made in the US from US materials

*Please note that your payment method will be charged upon ordering.

Stronger stitching, more durable buckles and NIR compliant webbing: these are some of the new features of the Mod. 1 edition Gen II Load Lifter Panel (patented).

Weighing just 8 ounces with carbon fiber stays, the Gen II LLP is an ideal option for a NICE Frame extension. We've retained all the features of the original Load Lifter Panel while significantly reducing weight and complexity. The top of the LLP remains as trim as possible, to help prevent it from snagging on foliage, and hook and loop fasteners allow stays to be swapped out in seconds. Four attachment straps with accompanying ladderlock buckles allow the Gen II LLP to be adjusted up to 6" above the top of the NICE Frame, providing an optimal fit for all users.

For the main attachment straps, we use an exceptionally durable, US-made polypropylene webbing that's lighter and far more slip resistant when wet versus mil-spec nylon webbing. All attachment straps can be doubled back through their ladderlock buckle to ensure the Load Lifter Panel remains tight to the frame through the roughest abuse.

To accommodate Crew Cab and Load Sling users, we've introduced the Buckle Adapter - a lightweight (under one ounce) accessory that slips around the NICE Frame's upper horizontal stay and provides attachment points for the Crew Cab's top male buckles, which are inaccessible when the LLP is attached. This removable accessory ensures the weight of a pack is transferred directly to the frame for maximum stability.

Check out a comparative review against the Mystery Ranch NICE Lift Kit on the Team Kendrick Outdoors site.
A write-up of the Gen II LLP can be found on Jerking the Trigger.

Specifications

• Weight (carbon fiber stays): 8.04 ounces (228 grams)
• Weight (fiberglass stays): 9.95 ounces (282 grams)
• Weight (Buckle Adapter): 0.88 ounces (25 grams)
• Materials: NIR compliant webbing, ITW Nexus hardware, HDPE plastic, T-90 nylon thread
• Features: adjustable 1"-6" height increase, replaceable stays, removable Buckle Adapter for Crew Cab users
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US materials

Gen II Load Lifter Panel is not affiliated with or endorsed by Mystery Ranch, Ltd.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

*Please note that your payment method will be charged upon ordering.

Stronger stitching, more durable buckles and NIR compliant webbing: these are some of the new features of the Mod. 1 edition Gen II Load Lifter Panel (patented).

Weighing just 8 ounces with carbon fiber stays, the Gen II LLP is an ideal option for a NICE Frame extension. We've retained all the features of the original Load Lifter Panel while significantly reducing weight and complexity. The top of the LLP remains as trim as possible, to help prevent it from snagging on foliage, and hook and loop fasteners allow stays to be swapped out in seconds. Four attachment straps with accompanying ladderlock buckles allow the Gen II LLP to be adjusted up to 6" above the top of the NICE Frame, providing an optimal fit for all users.

For the main attachment straps, we use an exceptionally durable, US-made polypropylene webbing that's lighter and far more slip resistant when wet versus mil-spec nylon webbing. All attachment straps can be doubled back through their ladderlock buckle to ensure the Load Lifter Panel remains tight to the frame through the roughest abuse.

To accommodate Crew Cab and Load Sling users, we've introduced the Buckle Adapter - a lightweight (under one ounce) accessory that slips around the NICE Frame's upper horizontal stay and provides attachment points for the Crew Cab's top male buckles, which are inaccessible when the LLP is attached. This removable accessory ensures the weight of a pack is transferred directly to the frame for maximum stability.

Check out a comparative review against the Mystery Ranch NICE Lift Kit on the Team Kendrick Outdoors site.
A write-up of the Gen II LLP can be found on Jerking the Trigger.

Specifications

• Weight (carbon fiber stays): 8.04 ounces (228 grams)
• Weight (fiberglass stays): 9.95 ounces (282 grams)
• Weight (Buckle Adapter): 0.88 ounces (25 grams)
• Materials: NIR compliant webbing, ITW Nexus hardware, HDPE plastic, T-90 nylon thread
• Features: adjustable 1"-6" height increase, replaceable stays, removable Buckle Adapter for Crew Cab users
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US materials

Gen II Load Lifter Panel is not affiliated with or endorsed by Mystery Ranch, Ltd.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

*Please note that your payment method will be charged upon ordering.

The MEAN Pad is a lightweight NICE Frame accessory that provides a better fit for users who prefer a more shapely lumbar region. It also allows the frame to lock onto the lower back of a user wearing body armor by bridging the gap formed between the rear SAPI plate and the lumbar portion of the frame. Non-slip fabric on the face helps the frame remain tight on the hips, while adjustable pad thickness provides an ideal fit for all users. The same high-grade, slip-resistant polypropylene webbing found on our Gen II Load Lifter Panel is used to ensure the MEAN Pad remains tight to the NICE Frame.

The hunting model attaches via two ladderlock buckles designed to provide a semi-permanent attachment to the NICE Frame. It is not intended to be removed quickly.
The military model includes two 3/4" side release buckles that allow it to be attached and removed quickly to accommodate frame usage with and without body armor. This model perfectly complements a NICE Frame featuring the removable Bolstered Ventilation and Stability (BVS) system.

Check out the user reviews from Military Morons and Packs & Beyond.

Specifications

• Weight (hunting): 2 ounces (56.5 grams)
• Weight (military): 2.32 ounces (65.7 grams)
• Dimensions: 4.75" x 6.375"
• Materials: 500 denier nylon, ITW Nexus hardware, mil-spec and Berry compliant webbing, T-70 nylon thread
• Features: adjustable thickness (1/8" to 1/2", plus 1/2" spacer foam)
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US materials (imported foam and non-slip fabric)

MEAN Pad is not affiliated with or endorsed by Mystery Ranch, Ltd.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

*Please note that your payment method will be charged upon ordering.

The MEAN Pad is a lightweight NICE Frame accessory that provides a better fit for users who prefer a more shapely lumbar region. It also allows the frame to lock onto the lower back of a user wearing body armor by bridging the gap formed between the rear SAPI plate and the lumbar portion of the frame. Non-slip fabric on the face helps the frame remain tight on the hips, while adjustable pad thickness provides an ideal fit for all users. The same high-grade, slip-resistant polypropylene webbing found on our Gen II Load Lifter Panel is used to ensure the MEAN Pad remains tight to the NICE Frame.

The hunting model attaches via two ladderlock buckles designed to provide a semi-permanent attachment to the NICE Frame. It is not intended to be removed quickly.
The military model includes two 3/4" side release buckles that allow it to be attached and removed quickly to accommodate frame usage with and without body armor. This model perfectly complements a NICE Frame featuring the removable Bolstered Ventilation and Stability (BVS) system.

Check out the user reviews from Military Morons and Packs & Beyond.

Specifications

• Weight (hunting): 2 ounces (56.5 grams)
• Weight (military): 2.32 ounces (65.7 grams)
• Dimensions: 4.75" x 6.375"
• Materials: 500 denier nylon, ITW Nexus hardware, mil-spec and Berry compliant webbing, T-70 nylon thread
• Features: adjustable thickness (1/8" to 1/2", plus 1/2" spacer foam)
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US materials (imported foam and non-slip fabric)

MEAN Pad is not affiliated with or endorsed by Mystery Ranch, Ltd.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

Conventional hipbelts can be a pain to tighten, especially on a heavy pack or while wearing body armor. The Belt Guide changes the direction your pack’s hipbelt tightens, allowing both sides of the belt to be cinched simultaneously with a forward motion, the way your arms actually work. This simple accessory attaches in seconds to the 2” tri-glide buckle on most Mystery Ranch and Dana Design hipbelts. Simply slide the Belt Guide through the tri-glide buckle and route your hipbelt’s webbing through the plastic loop for a drastically improved tightening experience.

Check out the user review from Military Morons.

Specifications

• Weight: 0.64 ounces/pair (18 grams)
• Materials: mil-spec nylon webbing and hardware, T-70 nylon thread
• Features: attaches to any hipbelt featuring a 2” tri-glide
• Colors: coyote brown, Multicam, foliage green, black, digital desert (for AOR1 packs)
• Made in the US from US materials
• Sold per pair

Belt Guide is not affiliated with or endorsed by Mystery Ranch, Ltd. or Marmot Mountain, LLC.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

Conventional hipbelts can be a pain to tighten, especially on a heavy pack or while wearing body armor. The Belt Guide changes the direction your pack’s hipbelt tightens, allowing both sides of the belt to be cinched simultaneously with a forward motion, the way your arms actually work. This simple accessory attaches in seconds to the 2” tri-glide buckle on most Mystery Ranch and Dana Design hipbelts. Simply slide the Belt Guide through the tri-glide buckle and route your hipbelt’s webbing through the plastic loop for a drastically improved tightening experience.

Check out the user review from Military Morons.

Specifications

• Weight: 0.64 ounces/pair (18 grams)
• Materials: mil-spec nylon webbing and hardware, T-70 nylon thread
• Features: attaches to any hipbelt featuring a 2” tri-glide
• Colors: coyote brown, Multicam, foliage green, black, digital desert (for AOR1 packs)
• Made in the US from US materials
• Sold per pair

Belt Guide is not affiliated with or endorsed by Mystery Ranch, Ltd. or Marmot Mountain, LLC.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

The Buckle Adapter was introduced with our Gen II Load Lifter Panel to provide attachment points for Crew Cab, Load Sling and Metcalf users. Weighing less than one ounce, it features two female side release buckles that slip around the upper horizontal stay of the NICE Frame. Use it in conjunction with the Gen II LLP or on its own to increase buckle real estate.

Specifications

• Weight: 0.88 ounces (25 grams)
• Materials: NIR compliant webbing, National Molding buckles, T-70 nylon thread
• Features: attaches to the upper horizontal stay of any NICE Frame, providing additional buckle attachment points
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US and imported materials

Buckle Adapter is not affiliated with or endorsed by Mystery Ranch, Ltd.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

The Buckle Adapter was introduced with our Gen II Load Lifter Panel to provide attachment points for Crew Cab, Load Sling and Metcalf users. Weighing less than one ounce, it features two female side release buckles that slip around the upper horizontal stay of the NICE Frame. Use it in conjunction with the Gen II LLP or on its own to increase buckle real estate.

Specifications

• Weight: 0.88 ounces (25 grams)
• Materials: NIR compliant webbing, National Molding buckles, T-70 nylon thread
• Features: attaches to the upper horizontal stay of any NICE Frame, providing additional buckle attachment points
• Colors: coyote brown, Multicam, foliage green, black
• Made in the US from US and imported materials

Buckle Adapter is not affiliated with or endorsed by Mystery Ranch, Ltd.
Mystery Ranch® and NICE® are registered trademarks of Mystery Ranch, Ltd.

The USMC Pack (FILBE) Hip Belt webbing strap has a tendency to loosen during use - ours doesn't. Made of a thick, ridged mil-spec nylon webbing, our FILBE belt strap upgrade significantly reduces slippage, even when wet. Redundant stitching and the latest ITW Nexus hardware ensure lasting durability, while closer tolerances allow the Hip Belt to be cinched over 1" tighter than the standard strap.

Specifications

• Materials: Mil-spec NIR-compliant nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: reduces waist strap loosening on the USMC Pack Hip Belt
• Color: coyote brown
• Made in the US from US materials

The USMC Pack (FILBE) Hip Belt webbing strap has a tendency to loosen during use - ours doesn't. Made of a thick, ridged mil-spec nylon webbing, our FILBE belt strap upgrade significantly reduces slippage, even when wet. Redundant stitching and the latest ITW Nexus hardware ensure lasting durability, while closer tolerances allow the Hip Belt to be cinched over 1" tighter than the standard strap.

Specifications

• Materials: Mil-spec NIR-compliant nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: reduces waist strap loosening on the USMC Pack Hip Belt
• Color: coyote brown
• Made in the US from US materials

Early lots of USMC Pack System shoulder harnesses suffered from load lifter buckle failures and improperly sized quick release straps. In 2013, the USMC began issuing a mandatory modification kit for affected packs manufactured by Eagle Industries. Made to military specifications with NIR-compliant webbing and hardware, our USMC Pack Modification Kit is now available to upgrade or repair your FILBE pack.

The Top Buckle Adapters are provided to replace the existing load lifter buckles on the Shoulder Harness Assembly. These attach directly around the top of the pack frame to ensure utmost reliability.
The Quick Release Adapters replace non-NIR-compliant and improperly sized quick release straps and attach by simple triglide buckles. The snap fasteners feature a NIR-compliant polymer cap instead of the standard enamel coating, providing superior wear resistance and infrared reflectance. This upgrade will prevent the quick release straps from unsnapping inadvertently.

Complete kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, NIR-compliant snap fastener, T-70 nylon thread
• Features: load lifter buckle and quick release strap upgrades for the USMC FILBE Main Pack
• Color: coyote brown
• Made in the US from US materials

Early lots of USMC Pack System shoulder harnesses suffered from load lifter buckle failures and improperly sized quick release straps. In 2013, the USMC began issuing a mandatory modification kit for affected packs manufactured by Eagle Industries. Made to military specifications with NIR-compliant webbing and hardware, our USMC Pack Modification Kit is now available to upgrade or repair your FILBE pack.

The Top Buckle Adapters are provided to replace the existing load lifter buckles on the Shoulder Harness Assembly. These attach directly around the top of the pack frame to ensure utmost reliability.
The Quick Release Adapters replace non-NIR-compliant and improperly sized quick release straps and attach by simple triglide buckles. The snap fasteners feature a NIR-compliant polymer cap instead of the standard enamel coating, providing superior wear resistance and infrared reflectance. This upgrade will prevent the quick release straps from unsnapping inadvertently.

Complete kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, NIR-compliant snap fastener, T-70 nylon thread
• Features: load lifter buckle and quick release strap upgrades for the USMC FILBE Main Pack
• Color: coyote brown
• Made in the US from US materials

The load lifter straps on the USMC Pack shoulder straps are subject to heavy wear, due in part to their location on the pack and the use of aggressive adjustment buckles. This wear is often so severe that the straps become difficult to adjust or tear apart completely. Our FILBE Load Lifter Strap Repair Kit replaces the existing load lifter straps and includes adjustable side release buckles that do not promote strap abrasion. The kit can be installed in the field in minutes and is made using mil-spec materials.

Please note that installation requires cutting the existing load lifter straps and is a permanent modification.

Kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement load lifter straps and buckles for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

The load lifter straps on the USMC Pack shoulder straps are subject to heavy wear, due in part to their location on the pack and the use of aggressive adjustment buckles. This wear is often so severe that the straps become difficult to adjust or tear apart completely. Our FILBE Load Lifter Strap Repair Kit replaces the existing load lifter straps and includes adjustable side release buckles that do not promote strap abrasion. The kit can be installed in the field in minutes and is made using mil-spec materials.

Please note that installation requires cutting the existing load lifter straps and is a permanent modification.

Kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement load lifter straps and buckles for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower half straps for the USMC Pack (FILBE) Shoulder Harness Assembly. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement quick release adjustment straps for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower half straps for the USMC Pack (FILBE) Shoulder Harness Assembly. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement quick release adjustment straps for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower compression straps for the USMC Pack (FILBE) Main Bag. Designed to compress the Main Bag sleep compartment or secure a sleeping mat. Includes two VELCRO® webbing keepers. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement lower compression straps for the USMC Pack Main Bag
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower compression straps for the USMC Pack (FILBE) Main Bag. Designed to compress the Main Bag sleep compartment or secure a sleeping mat. Includes two VELCRO® webbing keepers. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement lower compression straps for the USMC Pack Main Bag
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Genuine USMC Pack Buckle Repair Kit for the FILBE pack system. Made to military specifications with ITW Nexus and National Molding hardware enclosed in a resealable heavy duty bag. Kit contains:

• (2x) NM Techno Grab Male Side Release Buckles
• (2x) NM Female Snap-on Repair Buckles
• (1x) ITW GTLL 100 Split-Bar Ladderloc
• (1x) ITW Toaster Ellipse Cordloc
• (1x) ITW GrimLoc

Specifications

• Materials: National Molding & ITW Nexus hardware
• Features: repair kit for FILBE packs
• Color: coyote brown
• Made in the US from US materials

Genuine USMC Pack Buckle Repair Kit for the FILBE pack system. Made to military specifications with ITW Nexus and National Molding hardware enclosed in a resealable heavy duty bag. Kit contains:

• (2x) NM Techno Grab Male Side Release Buckles
• (2x) NM Female Snap-on Repair Buckles
• (1x) ITW GTLL 100 Split-Bar Ladderloc
• (1x) ITW Toaster Ellipse Cordloc
• (1x) ITW GrimLoc

Specifications

• Materials: National Molding & ITW Nexus hardware
• Features: repair kit for FILBE packs
• Color: coyote brown
• Made in the US from US materials

Do you run a FILBE or Mystery Ranch pack and miss those old school elastic webbing keepers? Made to military specifications (MOLLE II CO/PD-02-02F), our elastic keepers are made from durable 1" nylon elastic webbing and finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" nylon elastic (MIL-W-5664), T-70 nylon thread
• Features: MOLLE-style strap management
• Colors: coyote brown, Multicam, tan 499, foliage green, black
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.

Do you run a FILBE or Mystery Ranch pack and miss those old school elastic webbing keepers? Made to military specifications (MOLLE II CO/PD-02-02F), our elastic keepers are made from durable 1" nylon elastic webbing and finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" nylon elastic (MIL-W-5664), T-70 nylon thread
• Features: MOLLE-style strap management
• Colors: coyote brown, Multicam, tan 499, foliage green, black
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.

Replacement hook and loop webbing keepers for FILBE and Mystery Ranch packs, or any pack that needs strap management. Made to military specifications (FILBE PD 2-6-0925-55), our VELCRO® webbing keepers are made from 1" hook and loop that's finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" VELCRO® brand hook and loop, T-70 nylon thread
• Features: FILBE-style strap management
• Colors: coyote brown, foliage green, black, camo green, ranger green
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.
VELCRO® is a registered trademark of Velcro Industries B.V.

Replacement hook and loop webbing keepers for FILBE and Mystery Ranch packs, or any pack that needs strap management. Made to military specifications (FILBE PD 2-6-0925-55), our VELCRO® webbing keepers are made from 1" hook and loop that's finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" VELCRO® brand hook and loop, T-70 nylon thread
• Features: FILBE-style strap management
• Colors: coyote brown, foliage green, black, camo green, ranger green
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.
VELCRO® is a registered trademark of Velcro Industries B.V.

PLEASE READ BEFORE ORDERING:
• Review both the "Overview" and "More Details" tabs before placing an order.
• Artwork templates are available under the "More Details" tab. We highly recommend using a template to ensure your artwork is formatted correctly.
• Images that require editing before printing will incur an additional fee.
• Upon placing an order, please email your artwork image file to artwork@ovinnovations.com.

For tactical gear makers looking to have labels made on a budget, we now offer custom printed Reemay labels. These are high resolution, black and white (grayscale) laser printed and sold per 8.125"x11" sheet. Tags are made with Berry Amendment compliant Reemay stock and conform to MIL-DTL-32075 Type VI.

We charge a flat rate per printed sheet - no setup fee or minimum order requirement. Quantity of labels per sheet varies by size ordered, as indicated. Sheets will ship uncut and include grey guidelines for cutting (we find a straightedge and rotary cutter work best for this job, but household scissors will do fine).

For garment or other high wear use, please select the white label stock. This is the only style of label we offer that's rated for high wear applications, such as on a vest against the body. The print on our colored label stock is typically less durable than that on standard Type VI labels.

Custom label sizes are available upon request. Please contact us for more information.

Refunds or exchanges are not available after labels are printed.

Specifications

• Materials: Laser printed Reemay
• Features: custom printed Type VI labels
• Colors: white, tan, green
• Printed in the US on US materials

Reemay is a registered trademark of Fiberweb, Inc.

PLEASE READ BEFORE ORDERING:
• Review both the "Overview" and "More Details" tabs before placing an order.
• Artwork templates are available under the "More Details" tab. We highly recommend using a template to ensure your artwork is formatted correctly.
• Images that require editing before printing will incur an additional fee.
• Upon placing an order, please email your artwork image file to artwork@ovinnovations.com.

For tactical gear makers looking to have labels made on a budget, we now offer custom printed Reemay labels. These are high resolution, black and white (grayscale) laser printed and sold per 8.125"x11" sheet. Tags are made with Berry Amendment compliant Reemay stock and conform to MIL-DTL-32075 Type VI.

We charge a flat rate per printed sheet - no setup fee or minimum order requirement. Quantity of labels per sheet varies by size ordered, as indicated. Sheets will ship uncut and include grey guidelines for cutting (we find a straightedge and rotary cutter work best for this job, but household scissors will do fine).

For garment or other high wear use, please select the white label stock. This is the only style of label we offer that's rated for high wear applications, such as on a vest against the body. The print on our colored label stock is typically less durable than that on standard Type VI labels.

Custom label sizes are available upon request. Please contact us for more information.

Refunds or exchanges are not available after labels are printed.

Specifications

• Materials: Laser printed Reemay
• Features: custom printed Type VI labels
• Colors: white, tan, green
• Printed in the US on US materials

Reemay is a registered trademark of Fiberweb, Inc.

Genuine National Molding 1" Techno Grab male side release buckle (part # 9700) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" FILBE buckle
• Color: coyote brown
• Made in the US from US materials

Genuine National Molding 1" Techno Grab male side release buckle (part # 9700) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" FILBE buckle
• Color: coyote brown
• Made in the US from US materials

Genuine National Molding 1" snap-on female side release repair buckle (part # 9378) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" snap-on buckle
• Color: coyote brown
• Made in the US from US materials

Genuine National Molding 1" snap-on female side release repair buckle (part # 9378) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" snap-on buckle
• Color: coyote brown
• Made in the US from US materials

The ultimate in compact organization, THE-E Pocket Organizer is the brainchild of CDH-Tac Finland and is available exclusively from OV Innovations. This zippered clamshell pouch measures 5.25" by 6.5" and is 1" thick, ideal for EDC and tactical organization needs when space is critical. Adjacent rows of 1" elastic webbing provide more storage flexibility compared to other pocket organizers. Any row can be used alone for smaller items, while multiple rows can be used together to secure larger items. Additional features include:

• Carry/grab handle.
• 2 outer zippered pockets.
• External 2-slot pen/knife sleeve.
• 3 internal sleeve pockets, perfect for notepads.
• 5 total rows of 1" elastic webbing and 1 row of 2" elastic with numerous columns for pens, markers, multitools, etc.
• Additional 2" elastic loop on the inner spine.

Check out the user review from Loadedpocketz.

Specifications

• Weight: 5.8 ounces (164.6 grams)
• Dimensions: 5.25"x6.5"x1"
• Materials: 500 denier nylon, YKK USA zippers, mil-spec elastic webbing, T-90 nylon thread
• Features: 2 zippered outer pockets, front pen/knife sleeve, 3 internal sleeve pockets
• Colors: black, Kryptek Typhon, tan/coyote, Multicam
• Made in the US from US materials

The ultimate in compact organization, THE-E Pocket Organizer is the brainchild of CDH-Tac Finland and is available exclusively from OV Innovations. This zippered clamshell pouch measures 5.25" by 6.5" and is 1" thick, ideal for EDC and tactical organization needs when space is critical. Adjacent rows of 1" elastic webbing provide more storage flexibility compared to other pocket organizers. Any row can be used alone for smaller items, while multiple rows can be used together to secure larger items. Additional features include:

• Carry/grab handle.
• 2 outer zippered pockets.
• External 2-slot pen/knife sleeve.
• 3 internal sleeve pockets, perfect for notepads.
• 5 total rows of 1" elastic webbing and 1 row of 2" elastic with numerous columns for pens, markers, multitools, etc.
• Additional 2" elastic loop on the inner spine.

Check out the user review from Loadedpocketz.

Specifications

• Weight: 5.8 ounces (164.6 grams)
• Dimensions: 5.25"x6.5"x1"
• Materials: 500 denier nylon, YKK USA zippers, mil-spec elastic webbing, T-90 nylon thread
• Features: 2 zippered outer pockets, front pen/knife sleeve, 3 internal sleeve pockets
• Colors: black, Kryptek Typhon, tan/coyote, Multicam
• Made in the US from US materials