The USMC Pack (FILBE) Hip Belt webbing strap has a tendency to loosen during use - ours doesn't. Made of a thick, ridged mil-spec nylon webbing, our FILBE belt strap upgrade significantly reduces slippage, even when wet. Redundant stitching and the latest ITW Nexus hardware ensure lasting durability, while closer tolerances allow the Hip Belt to be cinched over 1" tighter than the standard strap.

Specifications

• Materials: Mil-spec NIR-compliant nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: reduces waist strap loosening on the USMC Pack Hip Belt
• Color: coyote brown
• Made in the US from US materials

The USMC Pack (FILBE) Hip Belt webbing strap has a tendency to loosen during use - ours doesn't. Made of a thick, ridged mil-spec nylon webbing, our FILBE belt strap upgrade significantly reduces slippage, even when wet. Redundant stitching and the latest ITW Nexus hardware ensure lasting durability, while closer tolerances allow the Hip Belt to be cinched over 1" tighter than the standard strap.

Specifications

• Materials: Mil-spec NIR-compliant nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: reduces waist strap loosening on the USMC Pack Hip Belt
• Color: coyote brown
• Made in the US from US materials

Early lots of USMC Pack System shoulder harnesses suffered from load lifter buckle failures and improperly sized quick release straps. In 2013, the USMC began issuing a mandatory modification kit for affected packs manufactured by Eagle Industries. Made to military specifications with NIR-compliant webbing and hardware, our USMC Pack Modification Kit is now available to upgrade or repair your FILBE pack.

The Top Buckle Adapters are provided to replace the existing load lifter buckles on the Shoulder Harness Assembly. These attach directly around the top of the pack frame to ensure utmost reliability.
The Quick Release Adapters replace non-NIR-compliant and improperly sized quick release straps and attach by simple triglide buckles. The snap fasteners feature a NIR-compliant polymer cap instead of the standard enamel coating, providing superior wear resistance and infrared reflectance. This upgrade will prevent the quick release straps from unsnapping inadvertently.

Complete kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, NIR-compliant snap fastener, T-70 nylon thread
• Features: load lifter buckle and quick release strap upgrades for the USMC FILBE Main Pack
• Color: coyote brown
• Made in the US from US materials

Early lots of USMC Pack System shoulder harnesses suffered from load lifter buckle failures and improperly sized quick release straps. In 2013, the USMC began issuing a mandatory modification kit for affected packs manufactured by Eagle Industries. Made to military specifications with NIR-compliant webbing and hardware, our USMC Pack Modification Kit is now available to upgrade or repair your FILBE pack.

The Top Buckle Adapters are provided to replace the existing load lifter buckles on the Shoulder Harness Assembly. These attach directly around the top of the pack frame to ensure utmost reliability.
The Quick Release Adapters replace non-NIR-compliant and improperly sized quick release straps and attach by simple triglide buckles. The snap fasteners feature a NIR-compliant polymer cap instead of the standard enamel coating, providing superior wear resistance and infrared reflectance. This upgrade will prevent the quick release straps from unsnapping inadvertently.

Complete kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, NIR-compliant snap fastener, T-70 nylon thread
• Features: load lifter buckle and quick release strap upgrades for the USMC FILBE Main Pack
• Color: coyote brown
• Made in the US from US materials

Genuine USMC Pack Buckle Repair Kit for the FILBE pack system. Made to military specifications with ITW Nexus and National Molding hardware enclosed in a resealable heavy duty bag. Kit contains:

• (2x) NM Techno Grab Male Side Release Buckles
• (2x) NM Female Snap-on Repair Buckles
• (1x) ITW GTLL 100 Split-Bar Ladderloc
• (1x) ITW Toaster Ellipse Cordloc
• (1x) ITW GrimLoc

Specifications

• Materials: National Molding & ITW Nexus hardware
• Features: repair kit for FILBE packs
• Color: coyote brown
• Made in the US from US materials

Genuine USMC Pack Buckle Repair Kit for the FILBE pack system. Made to military specifications with ITW Nexus and National Molding hardware enclosed in a resealable heavy duty bag. Kit contains:

• (2x) NM Techno Grab Male Side Release Buckles
• (2x) NM Female Snap-on Repair Buckles
• (1x) ITW GTLL 100 Split-Bar Ladderloc
• (1x) ITW Toaster Ellipse Cordloc
• (1x) ITW GrimLoc

Specifications

• Materials: National Molding & ITW Nexus hardware
• Features: repair kit for FILBE packs
• Color: coyote brown
• Made in the US from US materials

The load lifter straps on the USMC Pack shoulder straps are subject to heavy wear, due in part to their location on the pack and the use of aggressive adjustment buckles. This wear is often so severe that the straps become difficult to adjust or tear apart completely. Our FILBE Load Lifter Strap Repair Kit replaces the existing load lifter straps and includes adjustable side release buckles that do not promote strap abrasion. The kit can be installed in the field in minutes and is made using mil-spec materials.

Please note that installation requires cutting the existing load lifter straps and is a permanent modification.

Kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement load lifter straps and buckles for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

The load lifter straps on the USMC Pack shoulder straps are subject to heavy wear, due in part to their location on the pack and the use of aggressive adjustment buckles. This wear is often so severe that the straps become difficult to adjust or tear apart completely. Our FILBE Load Lifter Strap Repair Kit replaces the existing load lifter straps and includes adjustable side release buckles that do not promote strap abrasion. The kit can be installed in the field in minutes and is made using mil-spec materials.

Please note that installation requires cutting the existing load lifter straps and is a permanent modification.

Kits are individually packaged.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement load lifter straps and buckles for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower half straps for the USMC Pack (FILBE) Shoulder Harness Assembly. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement quick release adjustment straps for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower half straps for the USMC Pack (FILBE) Shoulder Harness Assembly. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement quick release adjustment straps for the USMC Pack Shoulder Harness Assembly
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower compression straps for the USMC Pack (FILBE) Main Bag. Designed to compress the Main Bag sleep compartment or secure a sleeping mat. Includes two VELCRO® webbing keepers. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement lower compression straps for the USMC Pack Main Bag
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Replacement lower compression straps for the USMC Pack (FILBE) Main Bag. Designed to compress the Main Bag sleep compartment or secure a sleeping mat. Includes two VELCRO® webbing keepers. Made to military specifications.

Specifications

• Materials: solution-dyed nylon webbing, ITW Nexus hardware, T-70 nylon thread
• Features: replacement lower compression straps for the USMC Pack Main Bag
• Color: coyote brown
• Made in the US from US materials
• Sold per pair

Do you run a FILBE or Mystery Ranch pack and miss those old school elastic webbing keepers? Made to military specifications (MOLLE II CO/PD-02-02F), our elastic keepers are made from durable 1" nylon elastic webbing and finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" nylon elastic (MIL-W-5664), T-70 nylon thread
• Features: MOLLE-style strap management
• Colors: coyote brown, Multicam, tan 499, foliage green, black
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.

Do you run a FILBE or Mystery Ranch pack and miss those old school elastic webbing keepers? Made to military specifications (MOLLE II CO/PD-02-02F), our elastic keepers are made from durable 1" nylon elastic webbing and finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" nylon elastic (MIL-W-5664), T-70 nylon thread
• Features: MOLLE-style strap management
• Colors: coyote brown, Multicam, tan 499, foliage green, black
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.

Replacement hook and loop webbing keepers for FILBE and Mystery Ranch packs, or any pack that needs strap management. Made to military specifications (FILBE PD 2-6-0925-55), our VELCRO® webbing keepers are made from 1" hook and loop that's finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" VELCRO® brand hook and loop, T-70 nylon thread
• Features: FILBE-style strap management
• Colors: coyote brown, foliage green, black, camo green, ranger green
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.
VELCRO® is a registered trademark of Velcro Industries B.V.

Replacement hook and loop webbing keepers for FILBE and Mystery Ranch packs, or any pack that needs strap management. Made to military specifications (FILBE PD 2-6-0925-55), our VELCRO® webbing keepers are made from 1" hook and loop that's finished with a high-strength bartack. Fits 1" wide straps.

Sold in packs of 10.

Specifications

• Materials: 1" VELCRO® brand hook and loop, T-70 nylon thread
• Features: FILBE-style strap management
• Colors: coyote brown, foliage green, black, camo green, ranger green
• Made in the US from US materials
• Sold per 10

Mystery Ranch® is a registered trademark of Mystery Ranch, Ltd.
VELCRO® is a registered trademark of Velcro Industries B.V.

Genuine National Molding 1" Techno Grab male side release buckle (part # 9700) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" FILBE buckle
• Color: coyote brown
• Made in the US from US materials

Genuine National Molding 1" Techno Grab male side release buckle (part # 9700) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" FILBE buckle
• Color: coyote brown
• Made in the US from US materials

Genuine National Molding 1" snap-on female side release repair buckle (part # 9378) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" snap-on buckle
• Color: coyote brown
• Made in the US from US materials

Genuine National Molding 1" snap-on female side release repair buckle (part # 9378) for the USMC FILBE Pack. Hard to find replacement part.

Specifications

• Materials: National Molding hardware
• Features: genuine 1" snap-on buckle
• Color: coyote brown
• Made in the US from US materials